SMC molds basically follow some of the same rules as injection molds, but SMC and BMC molds also have different characteristics from injection molds. For example, shear edge is the key point to be considered in the production of SMC and BMC molds.

The shrinkage of SMC mold is different from that of injection mold

There are two kinds of shrinkage of SMC mold. One is that the product is A-level surface with low roughness, and the shrinkage is between - 0.05% and 0%. We often call it negative shrinkage or zero shrinkage. The other is that the surface requirement is relatively loose, and the shrinkage is between 0% and 0.1%.

Temperature system of SMC mould

SMC and BMC molds need heating rather than cooling system. The mold temperature is usually 140 to 160. It is very important to keep the mold temperature consistent when designing the mold. The mold is easier to fill, the product is not easy to deform, and the surface aesthetics is better. The commonly used heating systems are steam, oil, high-pressure water, or electricity.

Vacuum assistant system of SMC mould

Products with A-class surface are usually molded by vacuum. The internal cavity and vacuum insulation of the mold are very important. The mold must have sensors to measure the mold temperature, pressure and vacuum state.

Production type SMC mould

High quality, long life and economy must be guaranteed. Years of SMC and BMC mould production experience of Ningguang mould Co., Ltd. can ensure the maximum benefits of customers.
  • Mobile Website
Copyright © Taizhou Huangyan Ningguang Mould Co., Ltd. All Rights Reserved.
XML 地图 | Sitemap 地图